Text(818) 642-5278QR code: scan to call (818) 642-5278On a computer? Scan to call from your phoneBook online
Heating

Furnace Installation Guide for Homeowners

Updated November 18, 2026 · AirMaker HVAC Inc

A new furnace is a 15–20 year decision. Knowing how the process works helps you compare quotes and get a system that heats evenly and runs efficiently.

Step 1: Size it correctly

Furnace size is measured in BTUs. The right size comes from a load calculation (Manual J) that looks at square footage, insulation, windows and ductwork. An oversized furnace short-cycles, wears out faster and leaves rooms uneven. An undersized one runs constantly on cold nights.

Step 2: Choose efficiency

Efficiency is shown as AFUE: the percentage of fuel turned into heat.

Type AFUE Notes
Standard efficiency 80% Lower cost, vents through a metal flue
High efficiency (condensing) 95–98% Lower gas use, vents with PVC, needs a condensate drain

In Los Angeles’ mild climate, an 80% furnace is often practical for attic installs. A high-efficiency or two-stage / variable-speed model adds comfort and quieter operation.

Step 3: Consider a heat pump

Many LA homeowners now choose a heat pump instead of a gas furnace, or a dual-fuel setup. Heat pumps heat and cool in one system and are an eco-friendly choice with low-GWP refrigerants. Rebates and tax credits may apply.

Step 4: Permits and inspection

Furnace replacement in Los Angeles requires a mechanical permit and inspection. Your contractor should pull the permit and schedule the inspection. Keep the paperwork for your records and for future home sales.

Installation day

  1. Protect floors and the work area
  2. Shut off gas and power, remove the old furnace
  3. Set the new furnace and connect gas, venting, electrical and ductwork
  4. Seal the plenum and connections
  5. Test gas pressure, combustion, temperature rise and safety controls
  6. Set up the thermostat and walk you through the system

Most straightforward replacements are completed in one day.

After the install

  • Register the equipment for the full manufacturer’s warranty
  • Change the filter regularly
  • Schedule yearly heating maintenance before winter

Get expert advice

AirMaker HVAC Inc installs furnaces and heat pumps from all major brands across Los Angeles. See heating installation or ask for free estimates on new systems.

We install furnaces across the Valley and the Westside, including furnace installation in Calabasas, heating replacement in Sherman Oaks and furnace and HVAC service in Santa Monica. In the West Valley we also handle furnace and heating repair in West Hills. We also serve Studio City homes and hillside properties.

Need a licensed technician? AirMaker HVAC Inc serves Los Angeles and the San Fernando Valley. Call (818) 642-5278 or book online.

Please note: This article is general information for homeowners and businesses. It is not a substitute for an inspection by a licensed technician. Costs, timelines and code requirements vary by home, equipment and city. Do not open gas, electrical or refrigerant components yourself. If you smell gas, leave the building and call your gas company from outside. If a carbon monoxide alarm sounds, get everyone outside and call 911.

Need service? Let’s fix it.

Call, text or send a request and we will get back to you during business hours.

(818) 642-5278
Faster answer: text us a photo
📸 Text a photo

20620 Hatton Street, Winnetka, CA 91306
Monday–Friday, 9 AM–5 PM

5.0★★★★★136 Google reviews
“Vlad gave us great service. Didn’t try to sell us anything.”— Len Weed
“Vlad came out to get my heater going. He is exactly professional and knowledgeable.”— Serge S.

Phone or email — at least one.

Preferred day
Preferred time

We call you back to confirm the exact time.

Call (818) 642-5278