Text(818) 642-5278QR code: scan to call (818) 642-5278On a computer? Scan to call from your phoneBook online
Heating

Furnace Replacement Cost in Los Angeles: What Changes the Price

Updated November 21, 2026 · AirMaker HVAC Inc

There is no single price for a new furnace in Los Angeles. Two homes on the same street can get very different quotes, because the furnace itself is only part of the job. Here is what actually changes the cost, so you can compare estimates and choose the right system.

Quick answers

  • What changes the price most? The type of system (gas furnace, heat pump or dual fuel), the size of the home, the condition of the ductwork and how hard the equipment is to reach.
  • Is the estimate free? At AirMaker HVAC Inc, in-home estimates for new systems are free, and you get written options. Financing is available on new systems.
  • How long does it take? Most single-furnace replacements take one day. Several systems, new ducts or a switch to a heat pump can take two to four days.
  • Do I need a permit? Yes. In the City of Los Angeles the permit comes from LADBS; Santa Monica, Beverly Hills, Calabasas and other cities issue their own. A good contractor pulls it and schedules the inspection for you.

1. The type of system

  • Single-stage gas furnace. The simplest replacement. Runs at full power every cycle.
  • Two-stage or variable-speed gas furnace (up to 96% AFUE or more). Costs more up front, but heats more evenly, runs quieter and uses less gas.
  • Heat pump. Heats and cools with one system. Often replaces both the old furnace and the AC, so compare it to the cost of replacing both.
  • Dual fuel. A heat pump for most of the year and a gas furnace for the coldest nights. Popular in larger homes and canyon areas.

Read more: types of home heating systems and premium heat pump installation.

2. The size of the home and the number of systems

A 1,400 sq ft ranch home in the Valley usually needs one furnace. A large home in Beverly Hills, Bel Air or Calabasas often has two or three systems, plus a guest house. The right size comes from a room-by-room load calculation, not from the size of the old unit. An oversized furnace costs more and short-cycles; an undersized one never catches up.

3. Ductwork

Old, leaky or crushed attic ducts can waste a large part of the heat you pay for. If the ducts are in good shape, the job is simpler. If they need sealing, new returns or full replacement, the price goes up, but so does comfort. See ductwork installation.

4. Location and access

Attic furnaces, tight hall closets, under-floor units and hillside homes with long gas and vent runs take more time and materials than a furnace in a garage. Condo buildings may need HOA approval and set work hours.

5. Venting, gas line and electrical

High-efficiency furnaces vent through PVC pipe and need a condensate drain. Switching to a heat pump may need a new circuit or a panel upgrade. These items should be listed on a written estimate, not added later.

6. Zoning and thermostats

If one floor is always too cold or too warm, zoning adds dampers and a thermostat for each area. It adds to the cost and often fixes the comfort problem that made you want a new system in the first place. See HVAC zoning systems.

Repair or replace?

Repair usually makes sense if the furnace is under 15 years old and the heat exchanger is sound. Replacement is usually the better value if the furnace is 15 to 20 years old, has a cracked heat exchanger, or needs a major part for the second time. More signs: when to replace a furnace. If you are not sure, a furnace repair visit starts with a diagnostic and a free carbon monoxide check.

How to compare estimates

  • Was a load calculation done, or was the new unit sized from the old one?
  • Are the permit, removal of the old unit, venting and condensate drain included?
  • What efficiency (AFUE or HSPF2) is quoted, and is it single-stage, two-stage or variable-speed?
  • What warranty comes with the equipment and with the labor?

Furnace installation by area

AirMaker HVAC Inc installs and replaces furnaces, heat pumps and dual-fuel systems across Los Angeles, and also repairs and maintains commercial refrigeration for restaurants: walk-in coolers, reach-ins, prep tables and ice machines. For a free in-home estimate on a new system, call (818) 642-5278 or book online.

Comparing cooling options too? Read AC replacement and heat pump installation cost in Los Angeles.

Need a licensed technician? AirMaker HVAC Inc serves Los Angeles and the San Fernando Valley. Call (818) 642-5278 or book online.

Please note: This article is general information for homeowners and businesses. It is not a substitute for an inspection by a licensed technician. Costs, timelines and code requirements vary by home, equipment and city. Do not open gas, electrical or refrigerant components yourself. If you smell gas, leave the building and call your gas company from outside. If a carbon monoxide alarm sounds, get everyone outside and call 911.

Need service? Let’s fix it.

Call, text or send a request and we will get back to you during business hours.

(818) 642-5278
Faster answer: text us a photo
📸 Text a photo

20620 Hatton Street, Winnetka, CA 91306
Monday–Friday, 9 AM–5 PM

5.0★★★★★136 Google reviews
“Vlad gave us great service. Didn’t try to sell us anything.”— Len Weed
“Vlad came out to get my heater going. He is exactly professional and knowledgeable.”— Serge S.

Phone or email — at least one.

Preferred day
Preferred time

We call you back to confirm the exact time.

Call (818) 642-5278