Heating

Heater Not Working? 7 Simple Checks Before You Call

Updated November 18, 2026 · AirMaker HVAC Inc

Los Angeles winters are mild, but cold nights in the Valley and the foothills still call for reliable heat. If your furnace or heat pump stops working, try these checks before you call. Some problems take one minute to fix.

Safety first: if you smell gas, leave the home, do not touch light switches and call your gas company from outside. If your carbon monoxide alarm goes off, get everyone outside and call 911.

1. Check the thermostat

  • Is it set to Heat, not Cool or Off?
  • Is the set temperature a few degrees above the room temperature?
  • Is the screen blank? Replace the batteries.
  • Check that a schedule or “away” mode is not overriding your setting.

2. Replace a dirty filter

A clogged filter can make the furnace overheat and shut itself off as a safety measure. Hold the filter to a light, and if you cannot see through it, replace it.

3. Check the breaker and the furnace switch

Furnaces have a power switch that looks like a light switch, usually on or near the unit. Make sure it is on. Then check the breaker panel. Reset a tripped breaker once. If it trips again, call a technician.

4. Make sure the gas is on

The gas valve handle near the furnace should be parallel to the gas pipe. If other gas appliances also do not work, contact your gas utility.

5. Check vents and returns

Make sure supply vents are open and return grilles are not blocked by furniture. If some rooms heat and others do not, your ducts may be leaking or disconnected. See duct repair.

6. Check the condensate drain (high-efficiency furnaces)

High-efficiency furnaces produce water. If the drain line or trap is clogged, a safety switch stops the furnace. Look for water in the pan or around the unit.

7. Read the status light

Most modern furnaces have a small window with a blinking LED. The pattern is an error code, explained on a label inside the furnace door. Write the code down. It helps the technician diagnose the problem faster.

When to call a professional

Call a licensed technician if:

  • The furnace starts and shuts off repeatedly
  • You hear banging, screeching or rumbling
  • You smell burning or gas
  • The pilot or ignitor will not light
  • The breaker trips again after a reset
  • None of the checks above helped

Do not keep resetting a furnace that keeps shutting down. Repeated lockouts usually mean a safety device is doing its job.

AirMaker HVAC provides heating and furnace repair in Los Angeles, and every heating visit includes a gas and carbon monoxide safety check. Not sure what type of system you have? Read our guide to home heating systems.

Need a licensed technician? AirMaker HVAC Inc serves Los Angeles and the San Fernando Valley. Call (818) 642-5278 or book online.

AC not cooling? Let’s fix it.

Call now or send a request and we will get back to you during business hours.

(818) 642-5278

20620 Hatton Street, Winnetka, CA 91306
Monday–Friday, 9 AM–5 PM

Call (818) 642-5278