Heating and AC for Studio City Homes: Hillside, Flats and Townhomes
Updated November 22, 2026 · AirMaker HVAC Inc
Studio City mixes three kinds of homes: hillside houses above Ventura Boulevard toward Laurel Canyon and Fryman, 1940s and 1950s bungalows in the Silver Triangle and Colfax Meadows, and newer townhomes near the boulevard. Each has its own heating and cooling headaches. This guide covers the problems we see most in Studio City and the fixes that actually work.
For service in the area, see AC and heating repair in Studio City.
Hillside homes: hot upstairs, cold downstairs
Multi-level homes in the hills are the most common call we get in Studio City. Heat rises, big windows take the afternoon sun, and one thermostat cannot keep every floor comfortable. What works:
- Zoning. Motorized dampers and a thermostat for each floor, so the system sends air only where it is needed. See HVAC zoning.
- Variable-speed equipment. A variable-speed heat pump, AC or furnace runs longer at lower speed and keeps temperatures even.
- Ductless mini splits for the rooms the main system never reaches: a top-floor primary suite, an office over the garage or a guest unit.
- Dual fuel for owners who want a heat pump most of the year with gas backup on cold nights.
Equipment on steep lots
Condensers on hillside lots often sit on narrow ledges, on decks or down a long flight of stairs. Line sets run long distances and access can be tight. We plan for this up front: proper pads and brackets, correct line set sizing for long runs, and safe access for future service. It is one reason hillside installs need a site visit before any estimate.
Bungalows and older homes on the flats
Older homes in the Silver Triangle and Colfax Meadows often have small attics, original ductwork and limited space for new ducts. Options here:
- A compact ducted heat pump with new, properly sized ducts
- Ductless mini splits when there is no room for ducts
- A new furnace with SEER2 AC where existing ducts are in good shape
We size every system with a load calculation, not by guessing from square footage.
Townhomes and condos
Townhomes near Ventura Boulevard usually have closet air handlers and rooftop or balcony condensers. We fit compact, quiet equipment and follow HOA rules on placement and noise.
Heating problems we fix in Studio City
Winter mornings in the Valley drop into the 30s and 40s. The most common heating failures we see are weak igniters, dirty flame sensors, failed inducer motors and heat pumps stuck in defrost. Every heating call includes a carbon monoxide check. Book furnace repair in Studio City or heat pump service in Studio City.
Permits
Studio City is part of the City of Los Angeles, so HVAC replacements are permitted through LADBS, with Title 24 and HERS testing where required. We pull the permit and schedule the inspection. See furnace installation in Studio City.
Brands we install
We install Mitsubishi Electric, Daikin, Lennox and Trane, and we service and repair all major brands.
Book a free estimate
AirMaker HVAC Inc is a licensed and insured C-20 and C-38 contractor serving Studio City, Sherman Oaks, Encino and the rest of Los Angeles, including commercial refrigeration for local restaurants and shops. Estimates on new systems are free. Book online or see everything we do in Studio City.
Please note: This article is general information for homeowners and businesses. It is not a substitute for an inspection by a licensed technician. Costs, timelines and code requirements vary by home, equipment and city. Do not open gas, electrical or refrigerant components yourself. If you smell gas, leave the building and call your gas company from outside. If a carbon monoxide alarm sounds, get everyone outside and call 911.
Need service? Let’s fix it.
Call, text or send a request and we will get back to you during business hours.
(818) 642-527820620 Hatton Street, Winnetka, CA 91306
Monday–Friday, 9 AM–5 PM
“Vlad gave us great service. Didn’t try to sell us anything.”— Len Weed
“Vlad came out to get my heater going. He is exactly professional and knowledgeable.”— Serge S.