Text(818) 642-5278QR code: scan to call (818) 642-5278On a computer? Scan to call from your phoneBook online
Furnace & Heater Repair · Studio City

Furnace & Heater Repair in Studio City, CA

Cold valley mornings are when older Studio City furnaces give out. AirMaker HVAC Inc repairs gas furnaces, heaters and heat pumps in ranch homes in Colfax Meadows, larger homes in the Silver Triangle and hillside houses south of Ventura Boulevard.

Text us a photo of the problemTrip charge + diagnostic visit from $149 Mon–Fri · applied toward the repair

★ 5.0 · 136 Google reviews•C-20 & C-38 · CA #1080128•Bonded & insured

Furnace & Heater Repair in Studio City, CA: AirMaker HVAC Inc is a local heating and air conditioning contractor rated 5.0 on Google (136 reviews). Call or text (818) 642-5278, Monday–Friday 9 AM–5 PM, or book online.

Service
Furnace & Heater Repair
Area
Studio City, CA
License
C-20 & C-38 · bonded & insured
New systems
Free estimates · financing available
Brands
All major brands

Attic and Closet Furnaces

Most Studio City ranch homes have a furnace in the attic or a hall closet. We repair igniters, flame sensors, inducer and blower motors, pressure switches and control boards, check the heat exchanger and venting, and finish every heating repair with a free carbon monoxide check.

Hillside and Multi-Zone Homes

Homes off Laurel Canyon and Coldwater often have two systems or a zoned furnace. When one floor is cold we check each furnace, damper and thermostat so the right part gets fixed the first time.

Common furnace repair problems in Studio City

  • Furnace runs but blows cold air
  • Igniter will not glow or the burners light and shut off
  • Dirty flame sensor or tripped high-limit switch
  • Inducer motor or pressure switch faults
  • Blower motor, capacitor or control board failure
  • Thermostat not calling for heat
Book furnace repair in Studio City

What every visit includes

  • Full ignition and flame check
  • Heat exchanger inspection for cracks
  • Gas pressure and carbon monoxide safety check
  • Filter, blower and airflow check
  • Thermostat wiring and settings
  • 5.0 rating from 136 Google reviews
  • Written estimates before any work starts
  • All major brands: Trane, Lennox, Goodman, Rheem, Daikin, Mitsubishi, LG
Winter offerFree carbon monoxide (CO) safety check with every heating repair in Studio CityGas furnace or heating system: we test for CO and gas leaks and inspect the heat exchanger and venting, at no extra charge.
Faster answer: text us a photoSnap the label on your AC, furnace, heat pump or water heater, or the problem itself. We see the model before we call you back, so the visit is faster.
📸 Text a photo

How a Furnace Repair Visit Works

  1. Call or book online. Call (818) 642-5278, text a photo of your furnace, or pick a time online.
  2. Your technician arrives in your appointment window. Shoe covers on, floors and the work area in your Studio City home protected.
  3. Full diagnostic and free CO check. We test ignition, flame sensor, gas pressure, venting and the heat exchanger, and check for carbon monoxide.
  4. Clear explanation and a written estimate. We show you what failed and your options. You approve before we start.
  5. Repair and safety test. We fix the problem, run a full heating cycle, and confirm your furnace heats every room evenly and safely.

Why You Shouldn't Wait on Furnace Repair

Winter mornings in the Valley drop into the 30s and 40s, and that is when older Studio City furnaces fail. A weak igniter or dirty flame sensor is a small repair today, but left alone it can overwork the inducer motor or control board. A cracked heat exchanger or blocked vent can leak carbon monoxide, so every heating repair includes a free CO check.

Repair or Replace?

If your furnace is 15 to 20 years old or keeps failing, see furnace installation in Studio City, read when to replace a furnace, or ask about our maintenance plans.

More HVAC services in Studio City

Furnace & Heater Repair nearby

Helpful guides

furnace repair · heater repair · gas furnace · flame sensor · igniter · heat exchanger · AFUE · carbon monoxide check · HVAC repair · commercial refrigeration for restaurants in Studio City

Reviews

What Our Customers Say

Read all 136 reviews →
★★★★★
Great HVAC service! Professional, reliable, and affordable. Highly recommend Vlad and AIRMAKER HVAC INC for AC and heating repair!
РРуслан Павицкий Google review
★★★★★
Vlad gave us great service. Didn’t try to sell us anything.
LLen Weed Google review
★★★★★
Vlad came out to get my heater going. He is exactly professional and knowledgeable.
SSerge S. Google review
★★★★★
The technician Vlad that came out was professional and wore covers over his shoes to respect our house.
GGS Appliance Inc Google review
★★★★★
Vlad was awesome, great customer service and very helpful, was prompt and courteous.
JJerickson Lorezco Google review
★★★★★
Excellent service from AIRMAKER HVAC INC.! Very happy with the work they did on my heat pump. They were knowledgeable, responsive, and professional throughout the entire process.
AAl Lacroix Google review
★★★★★
Vlad did an excellent repair of my lights and electrical panel, in addition to my HVAC unit. He is very professional.
SSol Rojhani Google review
FAQ

Furnace & Heater Repair in Studio City: FAQ

My furnace blows cold air. What should I check?

Make sure the thermostat is set to Heat and the filter is clean. If it still blows cold, the igniter, flame sensor or gas valve may have failed. Book a repair.

Should I repair or replace my furnace in Studio City?

If the furnace is under 15 years old and the heat exchanger is sound, repair usually makes sense. Older units or a cracked heat exchanger point to replacement. We give you both options in writing.

Do you service restaurant refrigeration in Studio City?

Yes. We repair walk-in coolers, reach-ins, prep tables and ice machines for restaurants on Ventura Boulevard.

How much does furnace repair cost in Studio City?

The cost depends on the problem and the parts. After the diagnostic we explain the repair options so you can decide before any work. Estimates for new systems are free.

Are you licensed and insured?

Yes. We hold California C-20 and C-38 licenses, CA #1080128, and are bonded and insured.

Need furnace repair in Studio City?

Call, text or send a request and we will get back to you during business hours.

(818) 642-5278
Faster answer: text us a photo
📸 Text a photo

20620 Hatton Street, Winnetka, CA 91306
Monday–Friday, 9 AM–5 PM

5.0★★★★★136 Google reviews
“Vlad gave us great service. Didn’t try to sell us anything.”— Len Weed
“Vlad came out to get my heater going. He is exactly professional and knowledgeable.”— Serge S.

Phone or email — at least one.

Preferred day
Preferred time

We call you back to confirm the exact time.

Call (818) 642-5278