Text(818) 642-5278QR code: scan to call (818) 642-5278On a computer? Scan to call from your phoneBook online
Furnace & Heater Repair · Brentwood

Furnace & Heater Repair in Brentwood, Los Angeles

Brentwood homes range from estates in Brentwood Park and Mandeville Canyon to condos along San Vicente Boulevard, and each heats differently. AirMaker HVAC Inc repairs gas furnaces and heat pumps across Brentwood, including Crestwood Hills, Brentwood Glen and Kenter Canyon.

Text us a photo of the problemTrip charge + diagnostic visit from $149 Mon–Fri · applied toward the repair

★ 5.0 · 136 Google reviews•C-20 & C-38 · CA #1080128•Bonded & insured

Furnace & Heater Repair in Brentwood, CA: AirMaker HVAC Inc is a local heating and air conditioning contractor rated 5.0 on Google (136 reviews). Call or text (818) 642-5278, Monday–Friday 9 AM–5 PM, or book online.

Service
Furnace & Heater Repair
Area
Brentwood, CA
License
C-20 & C-38 · bonded & insured
New systems
Free estimates · financing available
Brands
All major brands

Multi-Zone Heating North of Sunset

Larger Brentwood homes often have two to four furnaces or a zoned system with motorized dampers, with units in attics, basements and garages. When one floor stays cold, the cause can be a zone board, a damper or a single furnace. We test the whole system so the fix is the right one.

Condos South of Sunset

In the condo and apartment buildings along San Vicente and Barrington we repair closet furnaces, fan coils and heat pumps, and we follow building rules for access and work hours. Every repair includes a free carbon monoxide check.

Common furnace repair problems in Brentwood

  • Furnace runs but blows cold air
  • Igniter will not glow or the burners light and shut off
  • Dirty flame sensor or tripped high-limit switch
  • Inducer motor or pressure switch faults
  • Blower motor, capacitor or control board failure
  • Thermostat not calling for heat
Book furnace repair in Brentwood

What every visit includes

  • Full ignition and flame check
  • Heat exchanger inspection for cracks
  • Gas pressure and carbon monoxide safety check
  • Filter, blower and airflow check
  • Thermostat wiring and settings
  • 5.0 rating from 136 Google reviews
  • Written estimates before any work starts
  • All major brands: Carrier, Trane, Lennox, Goodman, Rheem, Daikin, Mitsubishi, LG
Winter offerFree carbon monoxide (CO) safety check with every heating repair in BrentwoodGas furnace or heating system: we test for CO and gas leaks and inspect the heat exchanger and venting, at no extra charge.
Faster answer: text us a photoSnap the label on your AC, furnace, heat pump or water heater, or the problem itself. We see the model before we call you back, so the visit is faster.
📸 Text a photo

How a Furnace Repair Visit Works

  1. Call or book online. Call (818) 642-5278, text a photo of your furnace, or pick a time online.
  2. Your technician arrives in your appointment window. Shoe covers on, floors and the work area in your Brentwood home protected.
  3. Full diagnostic and free CO check. We test ignition, flame sensor, gas pressure, venting and the heat exchanger, and check for carbon monoxide.
  4. Clear explanation and a written estimate. We show you what failed and your options. You approve before we start.
  5. Repair and safety test. We fix the problem, run a full heating cycle, and confirm your furnace heats every floor evenly and safely.

Why You Shouldn't Wait on Furnace Repair

Many Brentwood homes north of Sunset have two or three furnaces serving different floors and wings, so a failing unit is easy to miss until a bedroom wing stays cold. A furnace that short-cycles, smells like dust or burning, or blows lukewarm air usually gets worse, not better. Left alone, a weak igniter or dirty flame sensor can overwork the inducer motor or control board, and a cracked heat exchanger or blocked vent can leak carbon monoxide. That is why every heating repair includes a free CO check.

Yearly Furnace Maintenance

One tune-up a year keeps each furnace safe and efficient. We clean the burners and flame sensor, check the igniter, inducer and blower, test the safety switches, inspect the heat exchanger and venting, and replace or check the filter. For larger Brentwood homes we service every system on one visit and check zoning dampers and thermostats so each floor heats evenly. Ask about our maintenance plans and heating system maintenance. If your furnace is near the end of its life, see our options for new heating installation.

Reviews

What Our Customers Say

Read all 136 reviews →
★★★★★
Great HVAC service! Professional, reliable, and affordable. Highly recommend Vlad and AIRMAKER HVAC INC for AC and heating repair!
РРуслан Павицкий Google review
★★★★★
Vlad gave us great service. Didn’t try to sell us anything.
LLen Weed Google review
★★★★★
Vlad came out to get my heater going. He is exactly professional and knowledgeable.
SSerge S. Google review
★★★★★
The technician Vlad that came out was professional and wore covers over his shoes to respect our house.
GGS Appliance Inc Google review
★★★★★
Vlad was awesome, great customer service and very helpful, was prompt and courteous.
JJerickson Lorezco Google review
★★★★★
Excellent service from AIRMAKER HVAC INC.! Very happy with the work they did on my heat pump. They were knowledgeable, responsive, and professional throughout the entire process.
AAl Lacroix Google review
★★★★★
Vlad did an excellent repair of my lights and electrical panel, in addition to my HVAC unit. He is very professional.
SSol Rojhani Google review
FAQ

Furnace & Heater Repair in Brentwood: FAQ

One floor of my Brentwood home is cold. What is wrong?

In zoned homes it is often a stuck damper, a zone control board or one furnace that failed. We check each zone, the thermostats and the dampers.

Do you work in Mandeville Canyon and Brentwood Park?

Yes. We serve all of Brentwood, including Mandeville Canyon, Brentwood Park, Crestwood Hills and the condos south of Sunset.

Can you replace an old furnace with a heat pump?

Yes. We size and install heat pumps for whole homes or single zones. Estimates are free and financing is available on new systems.

How much does furnace repair cost in Brentwood?

The cost depends on the problem and the parts. After the diagnostic we explain the repair options so you can decide before any work. Estimates for new systems are free.

Are you licensed and insured?

Yes. We hold California C-20 and C-38 licenses, CA #1080128, and are bonded and insured.

Need furnace repair in Brentwood?

Call, text or send a request and we will get back to you during business hours.

(818) 642-5278
Faster answer: text us a photo
📸 Text a photo

20620 Hatton Street, Winnetka, CA 91306
Monday–Friday, 9 AM–5 PM

5.0★★★★★136 Google reviews
“Vlad gave us great service. Didn’t try to sell us anything.”— Len Weed
“Vlad came out to get my heater going. He is exactly professional and knowledgeable.”— Serge S.

Phone or email — at least one.

Preferred day
Preferred time

We call you back to confirm the exact time.

Call (818) 642-5278